ALKAN® ASTRO HIGH POWER · LED floodlight
53.AKPRL 3A1500
1500 W · 204,000 lm · 136 lm/W · IP66
Why this model
204,000 lumens. The ASTRO 3A1500.
The 3A1500 is the most powerful ASTRO: three modules, 1500 W and 204,000 lm at 136 lm/W. It is one of three ASTRO models with ENEC+, so its declared photometry has been independently verified. Four optics (10°, 17°, 25°, 30°) put that light exactly where the standard asks for it, from towers or a stadium roof. Control options are 1-10V, DALI, DMX, RDM and PWM.
What sets it apart
The highest luminous flux in the ASTRO HIGH POWER series.
Built for the job
Dust-tight and protected against powerful water jets, so it is ready for rain, sea air and pitch irrigation.
The operating range covers mountain winters and coastal summers.
High transmission with impact protection: the glass is rated IK08.
Die-cast aluminium with electrostatic powder coat in anthracite (RAL 7016).
186–264 VAC at 50/60 Hz.
Where it fits
Layouts for EN 12193 Class I competition lighting.
High output per luminaire can reduce the head count; DIALux confirms it per project.
High masts with narrow beams.
Application by competition class
Per EN 12193: high-level national and international competition, usually with large spectator distances. This is where the high-output and high-TLCI ASTROs belong.
Mid-level competition such as regional and club matches.
Training, school sport and recreational play. Compact ASTROs and fewer heads per mast are usually enough.
Optics guide
Optics for this model: 10° / 17° / 25° / 30°
Narrow beams (10°, 17°) suit long throws from high masts or the far side of the pitch. Wider beams suit shorter distances and the near side. Mixing optics on one mast is common and is decided in the calculation.
Engineering notes
Mounting height, tilt and aiming points are set per project in DIALux evo with the ASTRO photometric files. Glare is checked against the venue class in EN 12193. Each module is aimed on site from the calculated aiming list.
Installation: isolate the supply, protect the cable and tighten the brackets without damaging the product. Clean the glass periodically to keep the designed light levels.
Standards: 1-10V DIM, DALI, DMX, RDM, PWM. DMX and RDM let a lighting console run pre-match shows; DALI connects to building management.
Certificates
TÜV Rheinland ENEC licence to EN 60598-1 / EN 60598-2-5 for the 53.AKPRL series, plus ENEC+ for this model.
Downloads
Datasheet (PDF)ENEC (PDF)ENEC+ (PDF)
Questions we hear
How many ASTRO 3A1500 do I need for my pitch?
Send us the pitch size, mast positions and the EN 12193 class. We will return a DIALux layout with the quantity, optics and aiming.
Can it replace my existing metal-halide floodlights on the same masts?
Often, yes. We check the mast load against the weight and dimensions of the luminaire, then calculate the new layout.
Do you supply LDT/IES files?
Yes. We supply the photometric files for your designer, or we run the DIALux evo calculation for you.
Let’s light your venue with ASTRO
Send us the pitch size, the mast positions and the class you are aiming for. You get a DIALux layout, the quantities and an offer from the official ALKAN® distributor.
Get a DIALux layout for your venue →Technical specifications
| Power | 1500 W |
|---|---|
| Luminous flux | 204,000 lm |
| Efficacy | 136 lm/W |
| Optics | 10° / 17° / 25° / 30° |
| CCT | 4000 K |
| CRI | Ra>70 |
| IK rating | Body: IK09 · Glass: IK08 |
| Controls | 1-10V DIM, DALI, DMX, RDM, PWM |
| Weight | 37.40 kg |
| W × L × H | 635 × 831 × 505 mm |
| Protection | IP66 |
| Supply | 186–264 VAC |
| Ambient | −40 °C … +50 °C |
Tolerances: power +2.5%, luminous flux −10%, efficacy −5% (lm/W).
53.AKPRL 1A0300
53.AKPRL 1A0500
53.AKPRL 2A0650
53.AKPRL 2A0690 (TLCI 95)
53.AKPRL 2A1000
53.AKPRL 2A1200
53.AKPRL 2A1200 (Ra>80)