ALKAN® Planet

ALKAN® · Floodlights & Sports

Planet

100–240 W · 15,000–36,000 lm · IP66

Why this luminaire

Planet: powerful light for pitches, yards and open areas

Planet is an ALKAN® floodlight. It is built for sports grounds, logistics yards, ports and building façades, where light has to reach far and stay even. Our engineers choose the variant and the optic in DIALux evo, so you install exactly the power the area needs.

Built for the job

Die-cast aluminium body

Aluminium draws heat away from the LEDs, which protects light output and lifetime.

4 mm clear tempered glass

Tempered glass protects the LEDs and optics and is easy to keep clean.

IP66

Dust-tight and protected against powerful water jets (EN 60529).

IK09 · IK08

Impact resistance to EN 62262.

−40 °C to +50 °C

The operating range.

184–264 VAC

A wide input voltage window.

60,000 hours

LED lifetime.

Colour rendering Ra>70

Colour rendering index.

Where it fits

Sports grounds

Training pitches, courts and club grounds.

Yards and ports

Logistics yards, terminals and storage areas.

Façades and open areas

Building façades, squares and general area lighting.

Application by competition class

Competition class I

Per EN 12193: high-level national and international competition, usually with large spectator distances.

Competition class II

Mid-level competition such as regional and club matches.

Competition class III

Training, school sport and recreational play.

Engineering notes

Mounting and aiming

Mast, pole or wall mounting with the bracket. Tilt and aiming points come from the DIALux evo calculation, and we hand them over as an aiming list.

Choosing the optic

Optics and beam angles are defined per variant. We compare them in DIALux evo with your geometry and pick the one that reaches the target with the fewest luminaires.

Controls

No dimming interface is specified for this luminaire. If your project needs one, we check the options with the manufacturer before we quote.

Maintenance

Install and connect following the instructions supplied with the luminaire. Clean the cover periodically to keep the designed light levels; the calculation already includes a maintenance factor.

Certification and standards

CE: the manufacturer’s EC declaration of conformity under Low Voltage Directive 2014/35/EU (January 2025) names the AKPRL series.

ENEC: licence HN 69291508 from TÜV Rheinland InterCert for 53.AKPRL xxxP-⁠y, 100–⁠200 W.

Not covered by this licence: 53.AKPRL 220P-⁠H, 53.AKPRL 240P-⁠H.

CB test certificate DE 2-⁠043953 (TÜV Rheinland LGA, 2025-02-20) for 53.AKPRL xxxP-⁠y (IEC 60598-⁠2-⁠5).

Coverage is stated as published by ALKAN®. Certificate copies come with every offer.

Standards: EN 60598-1, EN 60598-2-5.

Datasheets for every variant are in the variants table on this page; LDT/IES photometric files are available on request.

Questions we hear

Can it replace my existing luminaires?

In most retrofit projects, yes. We check the existing mounting points and the target values in a calculation before we quote, so you know the result in advance.

What tolerances apply to these values?

Tolerances: power +5%, luminous flux −10%, efficacy −5%. Our calculations take this into account.

Plan your project with Planet

Send us drawings, photos or a few measurements of the site. You get a DIALux layout, the quantities and an offer from the official ALKAN® distributor.

Request a DIALux calculation

Technical specifications

Power100–240 W
Luminous flux15,000–36,000 lm
Efficacy137–157 lm/W
Colour temperature4000 K / 6500 K
Colour renderingRa>70
Ingress protectionIP66
Impact resistanceBody IK09, glass IK08
Ambient temperature−40 °C to +45 °C
Supply184–264 VAC 50/60 Hz
DriverENEC-certified, protected against voltage surges
LED lifetime60,000 h
HousingInjection-moulded aluminium
Cover / optic4 mm clear tempered glass
Finishelectrostatic powder coating, textured grey
StandardsEN 60598-1, EN 60598-2-5
CertificatesCE declarationENEC luminaire licenceCB test certificate
Product codeVersionPowerLuminous fluxEfficacyW × L × HWeightDatasheet (PDF)
53.AKPRL 100P-MMid-power LED100 W15,000 lm150 lm/W340 × 340 × 64 mm4.00 kgPDF
53.AKPRL 120P-MMid-power LED120 W17,040 lm142 lm/W340 × 340 × 64 mm4.20 kgPDF
53.AKPRL 140P-MMid-power LED140 W19,180 lm137 lm/W340 × 340 × 64 mm4.20 kgPDF
53.AKPRL 160P-MMid-power LED160 W23,360 lm146 lm/W340 × 340 × 64 mm4.20 kgPDF
53.AKPRL 180P-MMid-power LED180 W25,740 lm143 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 200P-MMid-power LED200 W28,000 lm140 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 100P-HHigh-power LED100 W15,300 lm153 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 120P-HHigh-power LED120 W18,840 lm157 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 140P-HHigh-power LED140 W21,700 lm155 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 160P-HHigh-power LED160 W24,480 lm153 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 180P-HHigh-power LED180 W27,000 lm150 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 200P-HHigh-power LED200 W31,000 lm155 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 220PHigh-power LED220 W33,440 lm152 lm/W340 × 340 × 64 mm4.50 kgPDF
53.AKPRL 240PHigh-power LED240 W36,000 lm150 lm/W340 × 340 × 64 mm4.50 kgPDF

Ranges cover all variants of the series.

Injection-moulded aluminium housing with cooling fins integrated into the cover for effective heat dissipation. A seamless silicone gasket seals the housing against dust and moisture at any tilt angle. Wide optics suit general area lighting. PLANET is a direct replacement for 250 W metal-halide floodlights and saves up to 65% energy.

Manufacturer page ↗

ALKAN® certifications

Quality & certificates →
ALKAN® Lighting logo

Official distributor

Official distributor of ALKAN® Lighting (Alkan Aydınlatma) in Montenegro

Alkan Asya Afrika Üretim ve Elektrik Malzemeleri Sanayi Ticaret A.Ş.

Explore Alkan luminaires →