ALKAN® · Street & Road Lighting

Merkur

50–150 W · 8,400–22,050 lm · IP66

Request a quote Request a DIALux calculation

Why this luminaire

Merkur: efficient, uniform light for roads and streets

Merkur is an ALKAN® road luminaire. It is made for streets, residential roads, car parks and public spaces, where uniformity and low running costs matter. We plan every project to EN 13201 in DIALux evo and choose the variant that meets the lighting class with the least energy.

Built for the job

Die-cast aluminium body

Aluminium draws heat away from the LEDs, which protects light output and lifetime.

4 mm clear tempered glass

Tempered glass protects the LEDs and optics and is easy to keep clean.

IP66

Dust-tight and protected against powerful water jets (EN 60529).

IK09 · IK08

Impact resistance to EN 62262.

−40 °C to +50 °C

The operating range.

184–264 VAC

A wide input voltage window.

60,000 hours

LED lifetime.

Colour rendering Ra>70

Colour rendering index.

Where it fits

Streets and roads

Urban streets, collector roads and through roads.

Residential areas

Residential streets, paths and cycle routes.

Car parks and squares

Open car parks, squares and public spaces.

Road lighting classes

M classes

Per EN 13201: motorised traffic on roads with medium to high driving speeds; based on road surface luminance.

C classes

For conflict areas such as junctions, roundabouts and shopping streets; based on illuminance.

P classes

For pedestrians and cyclists on footways, cycle paths and low-speed residential streets; based on illuminance.

Engineering notes

Mounting

Mounting options vary by model. Pole height, spacing and tilt come from the EN 13201 calculation.

Choosing the optic

Optics and beam angles are defined per variant. We compare them in DIALux evo with your geometry and pick the one that reaches the target with the fewest luminaires.

Controls

No dimming interface is specified for this luminaire. If your project needs one, we check the options with the manufacturer before we quote.

Maintenance

Install and connect following the instructions supplied with the luminaire. Clean the cover periodically to keep the designed light levels; the calculation already includes a maintenance factor.

Certification and standards

CE: the manufacturer’s EC declaration of conformity under Low Voltage Directive 2014/35/EU (January 2025) names the AKYAL series.

CE 2025 (PDF)

ENEC: licence HN 69291507 from TÜV Rheinland InterCert for 53.AKYAL xxxM-⁠y, 60–⁠150 W.

ENEC HN 69291507 (PDF)

Not covered by this licence: 53.AKYAL 050M-⁠M, 53.AKYAL 150M-⁠M.

CB test certificate DE 2-⁠043965 (TÜV Rheinland LGA, 2025-02-20) for 53.AKYAL xxxM-⁠y (IEC 60598-⁠2-⁠3).

CB DE 2-043965 (PDF)

Coverage is stated as published by ALKAN®. Certificate copies come with every offer.

Standards: EN 60598-1, EN 60598-2-3.

Datasheets for every variant are in the variants table on this page; LDT/IES photometric files are available on request.

Questions we hear

Can it replace my existing luminaires?

In most retrofit projects, yes. We check the existing mounting points and the target values in a calculation before we quote, so you know the result in advance.

What tolerances apply to these values?

Tolerances: power +5%, luminous flux −10%, efficacy −5%. Our calculations take this into account.

Plan your project with Merkur

Send us drawings, photos or a few measurements of the site. You get a DIALux layout, the quantities and an offer from the official ALKAN® distributor.

Request a DIALux calculation

Technical specifications

Power	50–150 W
Luminous flux	8,400–22,050 lm
Efficacy	135–168 lm/W
Colour temperature	3000 K / 4000 K / 6500 K
Colour rendering	Ra>70
Optics	asymmetric
Ingress protection	IP66
Impact resistance	Body IK09, glass IK08
Ambient temperature	−40 °C to +45 °C
Supply	184–264 VAC 50/60 Hz
Driver	ENEC-certified, protected against voltage surges
LED lifetime	60,000 h
Housing	Injection-moulded aluminium
Cover / optic	4 mm clear tempered glass
Finish	electrostatic powder coating, textured grey
Wind area (EPA)	0.15 m²
Mounting	0°, 5°, 10°, 15° tilt adjustment
Spigot	Ø42–60 mm
Standards	EN 60598-1, EN 60598-2-3
Certificates	CE declarationENEC luminaire licenceCB test certificate

Product code	Version	Power	Luminous flux	Efficacy	W × L × H	Weight	Datasheet (PDF)
53.AKYAL 050M-M	Mid-power LED	50 W	8,400 lm	168 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 060M-M	Mid-power LED	60 W	9,900 lm	165 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 080M-M	Mid-power LED	80 W	12,800 lm	160 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 100M-M	Mid-power LED	100 W	15,500 lm	155 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 120M-M	Mid-power LED	120 W	18,000 lm	150 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 150M-M	Mid-power LED	150 W	20,250 lm	135 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 060M-H	High-power LED	60 W	9,840 lm	164 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 080M-H	High-power LED	80 W	12,720 lm	159 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 100M-H	High-power LED	100 W	15,400 lm	154 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 120M-H	High-power LED	120 W	18,000 lm	150 lm/W	228 × 554 × 59 mm	3.50 kg	PDF
53.AKYAL 150M-H*	High-power LED	150 W	22,050 lm	147 lm/W